How long does the warranty on the iPV 5 extend?

The limited warranty we offer on the iPV 5 lasts 3 months from the date of purchase

How do I lock the resistance on the IPV 5?

Press and hold the plus and minus buttons at the same time until it displays the locked resistance

The device displays this when the resistance bounces and can be easily fixed by locking the resistance

The limited warranty we offer on the iPV D3 lasts 3 months from the date of purchase

Press and hold the plus and minus buttons at the same time until it displays the locked resistance

Chipset: YiHi SX505J

18650 Battery (not included)

Wattage: 1-60W

Output: ≤8V

Size: 82.2x48x22mm

Quiescent current: <10μA

Min Ω: ≥0.15Ω

Max Charge: 5V/1A

Pure Mode Setup

1. Wake up the device.

2. Install a VP cartridge while the device is awake.

3. Choose Pure Mode

4. Choose “LOCK NEW” for a fresh new installed cartridge. Or choose “LOCK OLD” only if you locked that same cartridge before.

5. Ready to vape.

Wattage Mode

1. Choose Wattage Mode

2. Press “UP” / “DOWN” to adjust power

Temp Mode Setup

1. Choose TEMP Mode.

2. Set Temp units: ℃/℉

3. Set your current room temp

4. Choose Temp Modulation:

CONSTANT – (Conservative)

DYNAMMIC – (Punchier vape)

5. Choose wire/TCR value

6. Lock the resistance

*Auto lock – an automatic resistance locking mechanism.

Once it senses that the coil has already cooled down to its base resistance, it will automatically register/lock the resistance Ω.

Current VP Cartridge specifications:

P15 | SS316L | 10W-15W | recommended for MTL

P20 | SS316L | 15W-20W | Mesh | recommended for MTL/RDTL

P40 | SS316L | 35W-45W | Mesh | recommended for RDTL/DTL

Weight	3 oz